Courses

Please find below the courses that SEFtec Global Training can provide.

We also offer tailor made courses to suit the client’s requirements and needs and can provide training on site or at  a clients premises if required throughout the RoK.

Please contact us for any further information.

HSE Safety Courses


H2S (Basic)

Course Aim

 The aims of the training are to ensure that the delegate gains the required

knowledge and understanding of the particular hazards and properties of H2S, and appropriate

emergency response actions to take should a H2S related incident arise.

Course Pre-requisites

There are no prerequisites required for Basic H2S Training.

Course Objectives

The course objectives are to understand:

  • Aims and Outcomes
  • Operators H2S Control Documents
  • Properties & Characteristics of H2S
  • SCBA Arrangements, Collection / Return
  • SCBA Work & Rest Periods
  • H2S Zones & Detectors
  • SCBA Pre Use Checks & Donning
  • Early Signs of H2S & SCBA Effects
  • Recovery Actions & Hose Handling
  • Phonetics & Communications
  • Handling of Cylinders Do’s and Dont’s

Learning Outcomes

On completion of the course attendees shall be:

• Competent in use of SCBA equipment.

Achievement Level

Attendees that successfully complete the course can be considered to have achieved the

underpinning theory and practical training in H2S use to a level of competency.

Course Duration: 1 day

H2S (Level 2)

 Course Aim

The course aim is to provide attendees with training in SCBA Equipment.

Course Pre-requisites

Prior to attending the course, delegates must complete a health check questioner.

Delegates must also complete the following courses before being authorized to use SCBA equipment on site:

  • Completed OPITO Basic H2S Course (available from SEFtec)

H2S Level II  Course Objectives

The course objectives are to understand:

  • Aims and Outcomes
  • Operators H2S Control Documents
  • Properties & Characteristics of H2S
  • SCBA Arrangements, Collection / Return
  • SCBA Work & Rest Periods
  • H2S Zones & Detectors
  • SCBA Pre Use Checks & Donning
  • Early Signs of H2S & SCBA Effects
  • Recovery Actions & Hose Handling
  • Phonetics & Communications
  • Handling of Cylinders Do’s and Dont’s

Learning Outcomes

On completion of the course attendees shall be:

• Competent in use of SCBA equipment.

Achievement Level

Attendees that successfully complete the course can be considered to have achieved the

underpinning theory and practical training in H2S Level 2 SCBA use to a level of competency.

 Course Duration:

1 day

Face Fit Testing

Course Aim

Face Fit Testing is a method for checking that a tight fitting face piece matches an individual’s facial features and can provide an adequate seal to the wearer’s face. 

What is the reason for Fit Testing?

The performance of tight-fitting face pieces depends on achieving a good contact between the wearer’s skin and the face seal of the face piece.

As people come in all sorts of shapes and sizes it is unlikely that one particular type, or size of RPE face piece, will fit everyone.

Inadequate fit will significantly reduce the protection provided to the wearer.

Any reduction in protection can put the RPE wearer’s life in danger or may lead to immediate or long-term ill health.

Learning Outcomes

On completion of the course attendees shall be:

• Given a final result as to what size mask and fit is best suited to their face.

 Course Duration: 40 mins.

SCBA Wearer / Operator including WABAS

Course Aim

This course is designed to train delegates to a basic level of competence, to allow them to use breathing apparatus safely and with confidence.

SCBA: Self Contained Breathing Apparatus.

Course Pre-requisites

Prior to attending the course;

All delegates will be asked to complete a standard medical questionnaire prior to course commencement and be in possession of medical form B if appropriate.

Course Objectives

The course objectives are to understand:

•   SCBA Arrangements, Collection / Return

  • SCBA Work & Rest Periods
  • SCBA Pre Use Checks & Donning
  • Early Signs of H2S & SCBA Effects
  • Recovery Actions & Hose Handling
  • Phonetics & Communications
  • Handling of Cylinders Do’s and Dont’s

Learning Outcomes

On completion of the course attendees shall be:

• Competent in use of SCBA equipment.

Achievement Level

Attendees that successfully complete the course can be considered to have achieved the

Underpinning theory and practical training in SCBA use to a level of competency.

 Course Duration: 1 day

Sour Gas Induction (Site Specific)

Please contact SEFtec Global Training for more information.

HSE Induction (Site Specific)

Please contact SEFtec Global Training for more information.

Confined Space Entry (Master level, Level 2, SCBA)

Please contact SEFtec Global Training for more information.

Confined Space Entry (Junior level, Level 1, no BA)

Please contact SEFtec Global Training for more information.

Confined Space Rescue

Please contact SEFtec Global Training for more information.

Permit to Work Level 1 (Introductory)

Please contact SEFtec Global Training for more information.

Permit to Work Level 2 (Signatures)

Please contact SEFtec Global Training for more information.

WRAP&TRIC / SAFE-R

Please contact SEFtec Global Training for more information.

Safe Work at Height

COURSE STRUCTURE AND RATIONALE

 Course Aim

The course aim is designed to provide attendees with the necessary underpinning theory and practical skills to enable them to work safely at height.

Course Pre-requisites

There are no pre-requisites required.

Course content:

The syllabus focuses on:

  • The main hazards associated with working at height.
  • The Hierarchy of Controls applicable to working at height.
  • The main applicable laws, standards, codes and practices relevant to working at height.
  • Safe working practices applicable to working at height and the various methods available for safe access and egress.
  • Safe systems of work.
  • The correct methods of selecting, checking, fitting and adjusting a full body safety harness.
  • The correct fall protection equipment appropriate to given situations.
  • Safe and unsafe situations.
  • Inspection, certification, storage and use of personal protective equipment.
  • Practical use of Fall arrest harness and ladders.

Learning Outcomes

  • Upon completion of the course the delegate will have an awareness of the main hazards and associated risks encountered when working at heights.
  • The course will also equip the participants with practical skills of using fall arrest harness and ladders.

Course Duration:

4 hours

Group:

Up to 12 delegates

Manual Handling

Please contact SEFtec Global Training for more information.

Hazard Identification

Please contact SEFtec Global Training for more information.

Risk Assessment

Please contact SEFtec Global Training for more information.

Power Tools

Please contact SEFtec Global Training for more information.

COSHH Awareness

Please contact SEFtec Global Training for more information.

Defensive Driving

Please contact SEFtec Global Training for more information.

Basic Fire Awareness & Extinguisher Training

Please contact SEFtec Global Training for more information.

Fire Warden / Marshall Training

Please contact SEFtec Global Training for more information.

Asbestos Awareness Training

Please contact SEFtec Global Training for more information.

Transport of Dangerous Goods Awareness Training

Please contact SEFtec Global Training for more information.

Basic Onshore Emergency Response (BOER)

Please contact SEFtec Global Training for more information.

Further Emergency Response (FOER)

Please contact SEFtec Global Training for more information.

Competence Assessor / Verifier qualifications


OPITO Approved Competence Assessor / SQA Assessor

Please contact SEFtec Global Training for more information.

OPITO Approved Competence Verifier / SQA Internal Verifier

Please contact SEFtec Global Training for more information.

OPITO Courses


OPITO BOSIET

COURSE STRUCTURE AND RATIONALE

 Course Aim

To provide delegates with a basic level of understanding and awareness of safety and emergency response on offshore installations.

Course Pre-requisites

Prior to attending the course, all delegates will be required to complete a medical declaration during the course induction.

All persons working offshore must hold a valid offshore medical certificate.

 Course Objectives

The course objectives are to understand:

  • Aims and Outcomes
  • Awareness of the hazards encountered when travelling to and from offshore installations
  • Offshore safety regime and safety management systems.
  • Theoretical and practical training including Sea Survival techniques, First Aid, basic Firefighting and self-rescue, Helicopter safety and escape.

Learning Outcomes

On completion of the course attendees shall:

  • Have a basic level of understanding and awareness of safety and emergency response on offshore installations.
  • Have skill and a level of knowledge and understanding of key areas, as defined in the OPITO Standard for Basic Offshore Safety Induction & Emergency Training.

Achievement Level

OPITO approved certification for Basic Offshore Safety Induction & Emergency Training (BOSIET) will be issued on successful getting through the training programme – Val. 4 years.

Course Duration: 3 day

OPITO FOET

COURSE STRUCTURE AND RATIONALE

 Course Aim

 This course is designed to meet further emergency training requirements for the oil and gas industry personnel.

Course Pre-requisites

Prior to attending the course, all delegates will be required to complete a medical declaration during the course induction.

All persons working offshore must hold a valid offshore medical certificate.

Must hold a valid BOSIET course certificate.

Course Objectives

 The course objectives are to:

  • Understand the aims and outcomes.
  • Refresh the delegate’s knowledge and understanding of the safety training course content.
  • Enhance and complement their existing knowledge of the hazards encountered when working on offshore installations.

Learning Outcomes

On completion of the course attendees will have refreshed and updated their knowledge and skills in:

  • Helicopter Underwater Escape Training & Emergency Breathing Systems.
  • Firefighting and Self Rescue.
  • Emergency Breathing Systems.

 Achievement Level

OPITO approved certification for Further Offshore Emergency Training (FOET) will be issued on successful getting through the training program.  - Val. 4 years.

Course Duration: 1 day

OPITO HUET/EBS

COURSE STRUCTURE AND RATIONALE

 Course Aim

 The aim of the HUET with EBS program is to prepare delegates that intend to travel to and

from offshore oil and gas installations and vessels by helicopter by providing specific training in

Pre-flight and in-flight requirements and to equip delegates with the basic emergency response

knowledge and skills required in the event of a helicopter emergency – with specific focus on

escaping from a helicopter following ditching.

Course Pre-requisites

No pre-requisites are required.

 Course Objectives

The course objectives are to understand:

  • Aims and outcomes
  • Inform delegates of typical pre-flight and in-flight requirements as passengers
  • Ensure that delegates understand their basic emergency response actions during a helicopter emergency.
  • Ensure delegates are able to demonstrate, in a simulated environment, that they can use the safety equipment, and follow procedures in preparing for, and during helicopter emergencies.

Learning Outcomes

On completion of the course attendees shall be able to demonstrate, in a simulated environment, that they can use the safety equipment properly and follow correct procedures in preparing for and during helicopter emergencies – with particular focus on escaping from a helicopter following ditching

Achievement Level

OPITO Approved HUET including EBS. This certificate is valid for 4 years.

 Course Duration: 1 day

OPITO AGT (Authorized Gas Tester)

COURSE STRUCTURE AND RATIONALE

 Course Aim

This course is designed to ensure that personnel required to carry out Gas testing duties, have the knowledge and skills required to carry out Gas testing duties safely and in accordance with a company’s policies and procedures.

Course Pre-requisites

Prior to beginning the course, delegates must complete a health questioner.

Delegates must also complete the following courses before being authorized to use SCBA equipment on site:

  • Completed OPITO Basic H2S Course (available from SEFtec)

Course Objectives;

The course objectives are to understand:

  • The aims and outcomes.

Learning Outcomes

On completion of the course attendees shall:

  • Be able to select, use and care for PPE needed for different oxygen deficient atmospheres plus toxic and flammable gas atmospheres.
  • Know the strengths and weaknesses of various types of oxygen, flammable and toxic gas detection equipment to include fixed, portable and personal monitors.

Achievement Level

Attendees that successfully complete the course can be considered to have achieved the

underpinning theory and practical training in the OPITO AGT (Authorized Gas Tester) course.

Course Duration: 2 day

Please contact SEFtec Global Training for more course information.

OPITO Safe Driving At Work (SDAW)

COURSE STRUCTURE AND RATIONALE

Course Aim

The aim of this course is to ensure that all personnel required to use a company vehicle to travel on company business achieve all of what is stated in objectives.

Course Pre-requisites

Attendance on this course is open to delegates who have a driver’s license which is valid in the location where the training is to be delivered.

If the delegate has completed the theory portion of the course using computer based training,a form or certificate verifying the completion date must be provided before the practical session can be taken.

Also, whether theory has been delivered in the classroom or by CBT, no more than one month can have elapsed between the theory and practical elements of the course.

Course Objectives

The course objectives are to understand:

  • The Aims and Outcomes.
  • Awareness of the risks to which they are exposed and how they are managed.
  • An understanding of relevant driving related laws/ regulations and safety issues.
  • Effective journey management and assessing vehicle condition.
  • An understanding of safe driving techniques and procedures.

Learning Outcomes

During the OPITO Safe Driving at Work training and assessment programme, delegates will gain an understanding of his/her responsibilities when driving a company vehicle.

Achievement Level

Course Duration: 1 day

OPITO H2S

Course Aim

 The aims of the training are to ensure that the delegate gains the required

knowledge and understanding of the particular hazards and properties of H2S, and appropriate

emergency response actions to take should a H2S related incident arise.

Course Pre-requisites

 There are no prerequisites required for Basic H2S Training.

Course Objectives

The course objectives are to understand:

  • Aims and Outcomes
  • Operators H2S Control Documents
  • Properties & Characteristics of H2S
  • SCBA Arrangements, Collection / Return
  • SCBA Work & Rest Periods
  • H2S Zones & Detectors
  • SCBA Pre Use Checks & Donning
  • Early Signs of H2S & SCBA Effects
  • Recovery Actions & Hose Handling
  • Phonetics & Communications
  • Handling of Cylinders Do’s and Dont’s

Learning Outcomes

On completion of the course attendees shall be:

• Competent in use of SCBA equipment.

Achievement Level

Attendees that successfully complete the course can be considered to have achieved the

underpinning theory and practical training in H2S use to a level of competency.

 Course Duration: 1 day

Major Emergency Management & Crisis Management Courses and Assessment


OPITO - Management of Major Emergencies Courses - Initial Response

Please contact SEFtec Global Training for more information.

OPITO - Control Room Operator

Please contact SEFtec Global Training for more information.

OPITO - OIM Controlling Emergencies

Please contact SEFtec Global Training for more information.

Major Emergency Management Introduction into Control Room Emergency Roles and Responsibilities

Please contact SEFtec Global Training for more information.

Relative Responder Training

Please contact SEFtec Global Training for more information.

Public Relations and External Affairs Training

Please contact SEFtec Global Training for more information.

Emergency Radio Operator Training

Please contact SEFtec Global Training for more information.

Media Management Training

Please contact SEFtec Global Training for more information.

RoK Mandatory Courses


Industrial Safety at Hazardous Industrial Facilities

Please contact SEFtec Global Training for more information.

Safety Regulations for Conducting Offshore Oil & Gas Operations

Please contact SEFtec Global Training for more information.

Labor Code & Labor Protection

Please contact SEFtec Global Training for more information.

Rules for the Safe Installation & Operation of Pressure Vessels

Please contact SEFtec Global Training for more information.

Safety Requirements for Steam Boilers and Water Heaters

Please contact SEFtec Global Training for more information.

Industrial Safety Requirements for Gas Processing Plants

Please contact SEFtec Global Training for more information.

Operational Safety for Electrical Installations

Please contact SEFtec Global Training for more information.

Fire Technical Minimum

Please contact SEFtec Global Training for more information.

Load Handling, Lifting and Transportation

Please contact SEFtec Global Training for more information.

IMO/SOLAS/MCA Security Awareness Training (Course 3.27)

Please contact SEFtec Global Training for more information.



Please contact us or press download button to download latest course info: